(Mid-H/High model) DADF Simplex Exit Sensor On Jam
故障原因:
Description
After the DADF Out Sensor ON, the DADF Exit Sensor did not turn ON within the specified time.
The DADF Exit Sensor turned ON before the DADF Out Sensor has turned ON.
故障排查:
Check the following:
Transportation failure due to foreign matter in the document path.
Foreign matter on the surface of the Platen Roll and Out Roll.
Wear on the surface of the Platen Roll and Out Roll.
The DADF Exit Sensor (DC330 [005-209]) for operation failure. (PL 54.9)
The DADF Out Sensor (DC330 [005-208]) for operation failure. (PL 54.9)
The DADF Platen Motor (DC330 [005-031]) for operation failure. (PL 54.10)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 54.3)
