故障代码查询
| 设备分类: |
复印机 » 富士胶片复印机 » Apeos C7070 / C6570 / C5570 / C4570 / C3570 / C3070 |
| 故障代码: |
005-946 |
| 故障解释: |
SS-Size Mismatch Jam on No Mix-Size (Cont) |
| 故障原因: |
Description
In No Mix mode, it was detected that a document with a different size in Slow Scan (SS)
direction was transported from the DADF. (If paper was not fed, 005-946 is displayed. If paper
was fed, 005-948 is displayed.) |
| 故障排查: |
Cause/Action [Mid-H/High Model]
Follow the instructions on the UI screen. If the error is not cleared, check the following:
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 54.9)
The DADF Feed In Sensor 1/2 (DC330 [005-204]) for operation failure. (PL 54.8)
The DADF Feed Out Sensor (DC330 [005-205]) for operation failure. (PL 54.9)
If no problem is found, replace the DADF PWB. (PL 54.3)
Cause/Action [Low/Mid-M Model]
Follow the instructions on the UI screen. If the error is not cleared, check the following:
The Document Tray Size Sensor 1/2 (DC330 [005-221/222]) for operation failure. (PL 57.11)
The DADF Regi Sensor (DC330 [005-110]) for operation failure. (PL 57.5)
The DADF Pre Regi Sensor (DC330 [005-206]) for operation failure. (PL 57.5)
If no problem is found, replace the DADF PWB. (PL 57.4) |
| 说明备注: |
- |
注册或关注公众号后查看更多内容
您需要 登录 才可以下载或查看，没有账号？我要加入
×
|
|
