(Low/Mid-M model) DADF Simplex Exit Sensor Off Jam
故障原因:
Description
After the DADF Regi Sensor OFF, the DADF Exit Sensor did not turn OFF within the specified time.
故障排查:
Check the following:
Transportation failure due to foreign matter on the document path.
Foreign matter on the Top Output Tray.
Foreign matter on the surface of the Exit Roll.
Wear on the surface of the Exit Roll.
The DADF Exit Sensor (DC330 [005-209]) for operation failure. (PL 57.7)
The DADF Regi Sensor (DC330 [005-110]) for operation failure. (PL 57.5)
The DADF Regi Motor (DC330 [005-012]) for operation failure. (PL 57.12)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 57.4)
