(Mid-H/High model) DADF Simplex Exit Sensor Off Jam
故障原因:
Description
After the DADF Out Sensor OFF, the DADF Exit Sensor did not turn OFF within the specified time.
DADF Exit Sensor turned OFF before the DADF Out Sensor has turned OFF
故障排查:
Check the following:
Transportation failure due to foreign matter in the document path.
Foreign matter on the Top Output Tray.
Foreign matter on the surface of the Out Roll and Exit Roll.
Wear on the surface of the Out Roll and Exit Roll.
The DADF Out Sensor (DC330 [005-208]) for operation failure. (PL 54.9)
The DADF Exit Sensor (DC330 [005-209]) for operation failure. (PL 54.9)
The DADF Platen Motor (DC330 [005-031]) for operation failure. (PL 54.10)
The DADF Exit Motor (DC330 [005-043]) for operation failure. (PL 54.10)
The Drive Gear for wear and damage.
The Timing Belt for skipped teeth and improper Belt tension.
The amount of grease at the Pulley and Gear.
If no problem is found, replace the DADF PWB. (PL 54.3)
